563 Connection could not be made to the Microsoft Exchange services on the specified server.
564 You cannot delete the existing data if you don't restore both the public and private stores.
565 You are about to restore Microsoft Exchange components. The Microsoft Exchange services on the destination server will be stopped.
566 Shutting down Microsoft Exchange services before restoring.
567 Starting Microsoft Exchange services on \\%s.\n Be sure to verify that this service has started successfully.
568 Microsoft Exchange service is starting. Be sure to verify that it has started successfully.
569 Copying Microsoft Exchange database files.
570 The Microsoft Exchange service on \\%s has\nreported an error. Check the event log for more information.
571 Your account is not a member of the Backup Operators group\non either this system or \\%s. \nYou cannot back up this Microsoft Exchange server.
572 The Microsoft Exchange services could not be stopped. Your account must be\na member of the Administrators group on this system and \non\\%s.You cannot restore to this Microsoft Exchange server.
573 You must choose to restore the Private or Public or both Information Stores.
574 You must enter a Destination Server.
575 \\%s Directory\nCircular Logging is turned on for this Microsoft Exchange component. Only Normal or Copy type backups can be performed while Circular Logging is turned on.
576 \\%s Information Store\nCircular Logging is turned on for this Microsoft Exchange component. Only Normal or Copy type backups can be performed while Circular Logging is turned on.
577 \\%s Directory\nA Normal or Copy type backup must be performed on this Microsoft Exchange component before a Differential or Incremental type backup can be performed on it.
578 \\%s Information Store\nA Normal or Copy type backup must be performed on this Microsoft Exchange component before a Differential or Incremental type backup can be performed on it.
579 Directory service on \\%s is not responding.
580 Information Store service on \\%s is not responding.
581 Backup Method: %s\n
582 Deleting existing log files.
583 You must select 'Erase all existing data' if the Destination Server is not the same as the Original Server.
584 You have selected to restore the Public database to a Private only server.\n
585 You have selected to restore the Private database to a Public only server.\n
600 Delete a Job
601 Removing a Scheduled Job
602 Are you sure you want to delete job "%s"?
603 Are you sure you want to remove job "%s"?
604 No Job Selected
605 Please select a job to run.
606 Please select a job to edit.
607 Create a New Job
608 Job "%s" already exists.
609 No more job space available.
610 Job is not in the Job List.
611 Invalid Job Name
612 Please select a valid job name.
613 Please enter a valid job name.
614 Edit a Job
615 BACKUP
616 TRANSFER
620 PROGMAN
621 PMGROUP
622 Backup
623 Insertion failed. Program Manager must be running.
624 Job Icon for Program Manager
625 Inserting Job "%s" into Group "%s". Do you want to continue?
642 Selection File "%s" was not found on %s at %s.\n
643 \nSelection File "%s" was found on %s at %s, but contained\nno valid selections for the settings at that time.\n
650 *.SEL
651 NTBACKUP.SCH
652 /S:
653 /K:
700 Job File Error
701 Schedule File Error
702 This job has been scheduled.
710 No day of the week specified.
711 Please check at least one day of the week.
712 No week of the month specified.
713 Please check at least one week of the month.
714 Invalid File Name
715 Invalid Interval
750 Monday
751 Tuesday
752 Wednesday
753 Thursday
754 Friday
755 Saturday
756 Sunday
757 Day of the Week
758 &Monday
759 &Tuesday
760 &Wednesday
761 T&hursday
762 &Friday
763 &Saturday
764 S&unday
765 &First
766 &Second
767 &Third
768 Fo&urth
769 &Last
770 Week of the Month
780 Normal
781 Copy
782 Incremental
783 Differential
784 Daily
785 Tape created on %s
786 Passwords do not match. Would you like to try again?
787 Passwords do not match.
788 Password Error
789 Backup Set Information (%d of %d sets)
790 < Not Named >
791 Tape is password protected.
792 This tape has been secured. You do not have the proper backup privileges.
793 This tape has been secured. You do not have the proper restore privileges.
794 Tape Security Violation
795 This tape has been secured. You do not have the proper privileges.
796 This tape has been secured. You do not have the proper erase privileges.
797 %s \\%s
800 Warning: This tape is out of sequence.
801 All Tapes
802 *.*
803 Catalogs Backup
804 Catalog Maintenance Error
805 The tape in the drive cannot be removed from the catalog.
806 Catalog Information
807 No uncataloged sets were found on the tape.
808 Change to Partially Cataloged
809 Do you really want to change %s to partially cataloged?
810 Remove backup set from catalog
811 Do you really want to remove tape %s from the catalog?
812 Unable to load catalog data from the tape.
813 Backup Error
814 Current tape is from a different tape family.
815 Error Restoring File
816 Backup cannot restore %s: There is not enough space on the disk.\n\nDelete one or more files to increase disk space, and then try again.
830 Login to:
831 *.BKS
832 .BKS
833 Selections invalid for current network setting.
834 Network setting is currently Server/Volumes, but mapped drives were found. Do you wish to continue?
835 Network setting is currently Mapped Drives, but server/volumes were found. Do you wish to continue?
836 Server/Volumes
837 Mapped Drives
838 Advanced File Selection
839 No servers are currently attached.
840 No Files Selected.
841 Confirm Deletion of Selection File
842 Are you sure you want to delete the file "%s"?
843 Selection file "%s" is being used by job "%s".
844 %s Already Exists.
845 Do you want to replace "%s"?
846 Invalid File Name
847 Please enter a valid file name.
849 Please check the dates again.
850 The 'To' date must be later than the 'From' date.
851 A tape must be cataloged before making advanced selections.
852 No tapes are cataloged.
853 Selection file "%s" could not be found.
854 This selection file contains selections from a network drive that could not be found.
855 Specified computer is not a Microsoft Exchange server or its Microsoft Exchange services are not started.
856 The connection to the server being restored will be terminated and no further progress indication will be available. The recovery procedure will continue on the server and cannot be interrupted.
857 Microsoft Exchange
858 Directory
859 Information Store
860 Specified computer is not a Microsoft Exchange server.
861 Specified computer cannot be found.
862 The Microsoft Exchange %s service is not \nstarted on the selected computer.
863 The selected Microsoft Exchange service is currently \nbeing backed up by another process.
864 Your account does not have access to start the Microsoft Exchange services on the specified computer.
865 Microsoft Exchange service failed to start.
866 Microsoft Exchange service is already running on the specified computer.
870 Unable to open selection file.
880 Invalid Next Time
882 Check the minutes and try again.
883 Check the hours and try again.
884 Check the am or pm and try again.
885 Check the day and try again.
886 Check the month and try again.
887 Check the year and try again.
888 All backup sets
890 Debug Settings Warning
891 The number of debug messages to keep must be at least 10.
892 The number of debug messages to keep may not be greater than 250.
893 The file name may not contain blanks.
900 Log Files
901 View Log File
902 Log File Name: %s
903 Current Date: %s
904 Current Time: %s
907 Logged on
908 .BKS
909 .TKS
910 .RSS
911 .LST
912 at
913 %8ld bytes
914 for
915 BKUP
916 .LOG
917 Scanning log file...
918 Log file contains more than %ld lines.
919 %s supports viewing only the first %ld lines.
938 Eject Tape
939 The tape has been rewound.\nPlease remove the tape and choose OK to continue.
940 There is no tape in the drive.
941 Tape Eject Failed.\n Not possible to eject tape now.
957 Insufficient memory available. Close other applications before starting this application again.
958 Insufficient memory available. To continue, close another application and choose Retry or choose Cancel to quit.
959 Insufficient memory available.
970 Page %4d Date: %s Time: %s Log File Name: %s
971 Do you want to print the log file?
972 A Printer Setup dialog box is already open.\n Close it and try again.
973 Print Manager
974 A default printer must be specified.
975 There are no log files selected to be printed.
976 Printing of log files canceled.
977 Printing of log files complete.
978 %d log files
979 %d log file
980 Unable to start the print operation.
981 Printer driver not found.
982 Cannot access the specified printer driver.
983 Printing "%s" Page %4d. Choose <Esc> to cancel.
984 Printing "%s" complete.
985 Printer driver error. Setup failed.
986 There are no printers available.
987 on
988 Printer is currently unavailable.
1001 Back up data from disk to tape.
1002 Restore data from tape to disk.
1003 Catalog and search tape for backup sets.
1004 Erase a Tape
1005 Retension a Tape
1006 Rewind and Eject the Tape
1007 Change Hardware specific settings
1008 Exit this application; close it down
1009 Format a tape
1010 Connect to a Microsoft Exchange server.
1020 Expand the Tree One Level down
1021 Expand the current branch
1022 Expand All branches
1023 Collapse the current branch
1030 Show the tree list and the directory list.
1031 Show only the tree list.
1032 Show only the directory list.
1034 Show all of the file details.
1035 Show/Hide the Status Bar.
1036 Show/Hide the Tool Bar.
1037 Select a new font.
1038 Create a split bar to resize tree and directory windows.
1050 Check the highlighted item(s)
1051 Uncheck the highlighted item(s)
1080 Overlap active windows.
1081 Place active windows adjacent to one another.
1082 Arrange all icons.
1083 Update the contents of the active window.
1084 Close all user created windows.
1090 Display the Help Index window.
1091 Search for information on a specific subject
1092 Display help on the available keystroke commands.
1093 Display help on the available commands.
1094 Display help on MaynStream procedures.
1095 Display help on using the Help system.
1096 About Backup
3004 a
3005 p
3012 Insert a tape in %s.
3013 Replace the tape in %s.
3014 Press any key to continue...
3015 Tape in drive %s is not properly inserted.
3016 Backup of %s on %s at %s\nBackup set #%d on tape #%d\nBackup description: "%s"
3017 Do you want to append data to this tape?
3018 All of the data on the tape in drive %s will be replaced.\n\nTape: %s\n Tape number %d\nSet number %d: %s\n\nDo you want to replace this information?
3019 Do you want to replace the data on this tape?
3020 WARNING: You are about to restore data to %s.
3021 Do you want to verify this data with the data on drive %s?
3023 Do you want to search for another backup set on this tape?
3024 Do you want to continue?
3025 The tape in %s is not blank. It was created by another application. Do you wish to continue?
3026 The tape in %s cannot be read.
3027 There is no more data on this tape.
3028 Searching for the backup set. Please wait...
3029 Rewinding the tape. Please wait...
3030 Waiting for the tape drive. Please wait...
3031 Backup started on %s at %s.
3032 Restore started on %s at %s.
3033 Verify started on %s at %s.
3034 Directory %s
3035 File %s is in use. It has been skipped.
3036 Backup completed on %s at %s.
3037 Restore completed on %s at %s.
3038 Verify completed on %s at %s.
3039 Backed up %ld file in %ld directory.
3040 Backed up %ld files in %ld directory.
3041 Backed up %ld files in %ld directories.
3042 %ld Macintosh file was backed up.
3043 %ld Macintosh files were backed up.
3044 File %s is corrupted.\nThis file cannot be verified.
3045 One corrupted file was backed up.
3046 %ld corrupted files were backed up.
3047 File %s is in use but is being backed up anyway.
3048 %ld file was in use.
3049 %ld files were in use.
3050 %ld file was skipped.
3051 %ld files were skipped.
3052 Restored %ld file in %ld directory.
3053 Restored %ld files in %ld directory.
3054 Restored %ld files in %ld directories.
3055 %ld Macintosh file was restored.
3056 %ld Macintosh files were restored.
3057 One corrupted file was restored. This file was corrupted before it was backed up.
3058 %ld corrupted files were restored. These files were corrupted before they were backed up.
3059 Corrupted file %s was restored.
3060 %ld in-use file was restored.
3061 %ld in-use files were restored.
3062 In-use file %s was restored.
3063 Verified %ld file in %ld directory.
3064 Verified %ld files in %ld directory.
3065 Verified %ld files in %ld directories.
3066 %ld Macintosh file was processed.
3067 %ld Macintosh files were processed.
3068 File %s is different.
3069 %ld files were different.
3070 File %s was not found on disk.
3071 Processed %s bytes in %d minute(s) and %d second(s).
3072 Processed %s bytes in %d minute(s).
3073 Processed %s bytes in %d second(s).
3074 Rate: %ld bytes/second.
3075 Verified %ld file in %ld directories.
3094 Write Protected
3095 Unknown Device
3096
3097 Seek error
3098 Sector not found.
3099
3100 Write prot
3101
3102 General failure.
3103 Unrecoverable Disk Error
3104 {List of skipped files during backup of %s, device %s at %s, %s.}
3106 File %s is in use and is waiting.
3107 \nBackup of "%s"\nBackup set #%d on tape #%d\nBackup description: "%s"
3108 List of corrupted files during Backup of %s, device %s at %s, %s.
3118 %ld file was different.
3119 File information found on tape:
3120 File information found on disk:
3121 {List of files not verified from %s, device %s on %s at %s.}
3122 Verify failed at offset %ld.
3123 Disk file was not found or was not accessible.
3124 Contents verified.
3125 The selections for %s will be omitted from the operation.
3127 Transfer deletion started on %s at %s.
3128 Transfer deletion completed on %s at %s.
3129 Deleted %ld file in %ld directory.
3130 Deleted %ld files in %ld directory.
3131 Deleted %ld files in %ld directories.
3132 %ld Macintosh file was deleted.
3133 %ld Macintosh files were deleted.
3134 The file "%s" on disk is more recent than the version on tape.
3135 Enter a new password or press <Enter> to skip the password:
3136 This tape is not password protected.
3137 Reenter the password to confirm that it is correct:
3138 The password does not match. Please try again.
3139 The password is confirmed.
3140 Enter the old password:
3141 The password does not match. Please try again.
3144 Tape created on
3145 Insert the following tape in %s:\n\n%s\nTape #%d.
3150 One file was not found on the target disk.
3151 %ld files were not found.
3152 %ld directory was not found.
3153 %ld directories were not found.
3154 Directory %s not found on the disk.
3157 Insert tape number %d in drive %s.
3159 WARNING: This tape was created with the Transfer option. The data on this tape may have been permanently erased from your disk.
3160 WARNING: The CORRUPT.LST file was found. This file indicates that corrupted file(s) have been backed up.
3161 Tape number %d is out of sequence.
3169 Abort, Retry, Fail?
3170 F
3171 Fail
3172 A
3173 Backup Abort
3174 R
3175 Retry
3176 Exclude script NOVELL.NKS was not found.
3177 Exclude script EXCLUDE.RSS was not found.
3178 Do you want to restore the bindery files if they are present in this backup set?
3179 Do you want to restore directory security information for each directory?
3180 A tape read error occurred. Writing recovered data to %s.
3181 The recovered data was associated with a file.
3182 The recovered data was associated with a directory.
3183 The tape data starting at offset %d, size %d was unreadable. The file has been padded.
3186 Do you want to erase the data on this tape?
3187 Tape retension started on %s at %s.\nRetensioning...
3188 Tape retension completed on %s at %s.
3189 Tape Erase started on %s at %s.\nErasing.
3190 Tape Erase completed on %s at %s.
3191 Tape security erase started on %s at %s.\nErasing...
3212 Do you want to delete all data from your disk?
3213 Do you want to verify the Backup operation?
3214 Do you want to verify the Restore operation?
3216 Backup set #%d: %s was added to the catalog.
3243 Unable to open the file %s - skipped.
3247 Security information will be restored for all selected directories, even if no files are restored to these directories.
3248 The tape was not read before it was erased. You must manually delete this tape from the catalog.
3249 File %s will be smaller if it is restored.
3250 Do you want to restore this file?
3257 Insert tapes %d-%d in drives %d-%d.
3258 Drive %d
3260 To make an additional copy, wait for the tape to finish rewinding and insert another tape.
3261 Do you want to make another copy?
3263 Security information for the %s directory is different.
3266 %ld security difference was found.
3267 %ld security differences were found.
3268 Insufficient privilege for the file %s - skipped.
3269 Insufficient disk space. Verify that you have full access to the Working Directory and there is disk space available.
3270 Unable to create the file %s.
3271 Unable to create the directory %s.
3272 Error restoring AFP resource data for the file %s.
3273 Error restoring the file %s.
3274 Unable to restore the directory %s.
3275 Unable to restore "File Attributes Security" for file %s.
3277 Unable to restore "Extended Attribute" information for directory %s.
3282 Searching for the next file. Please wait...
3283 Press any key to return to the menu.
3285 Skip this file?
3286 Extended file information for %s is different.
3292 WARNING: This backup set contains Macintosh folders and files. To restore this information, filenames and directory names may need to be abbreviated from their original Macintosh format.
3296 WARNING: Unable to read extended file information for file "%s".
3297 \nTape #%d: "%s"\nBackup performed on %s at %s\nBackup set #%d: "%s"
3299 {Attachment to the device failed during backup of %s, device %s at %s, %s.}
3300 Error(s) were found during the operation.
3301 Examine %s for more detailed error information.
3302 Security information for the file %s is different.
3303 Extended Attribute information for the file %s is different.
3304 Resource fork data for the file %s is different.
3308 \nThe operation was successfully completed.
3309 You cannot append a transfer set to a tape containing data that was created using the Backup operation.
3323 \nVerify of "%s"\nBackup set #%d on tape #%d\nBackup description: "%s"
3326 The tape in the drive is unrecognizable. Use another tape.
3327 Transfer
3328 The tape in the drive is unrecognizable.
3329 The tape in the drive is blank.
3330 There is no tape in the drive.
3331 The tape in the drive is "%s" and was created by %s on %s at %s.
3333 Do you want to end this operation?
3334 Process Aborted
3335 The tape drive is busy. Please wait...
3336 The end of the tape was reached. When the tape finishes rewinding, insert the next tape for this backup.
3337 The tape is full. When the tape finishes rewinding, insert the next tape for this backup.
3338 %s backup of "%s" performed %s at %s by %s.
3339 Retensioning the tape may take several minutes.
3340 \n
3341 Search for the next backup set on tape: "%s"?
3342 Invalid tape for the Next Set on Tape operation.
3343 A backup set was found and has been added to the catalog. Do you want to continue searching?
3344 Poll drive is disabled.
3345 This tape cannot be cataloged.
3346 Tapes in this family require sequential access. Please insert the first tape in this family.
3347 Do you want to keep the current settings for this operation?
3348 Do you want to erase the password database?
3349 You have entered three invalid passwords. The password database has been disabled.
3350 The password failed to confirm. Please try again.
3351 Initializing the file system.
3352 Initializing the hardware.
3353 Initializing the application.
3354 Application initialized.
3355 Initializing the VLM.
3356 \n Opening log: %s, mode: %c\n
3357 Unable to attach to %s.
3358 \n Closing log: %s \n
3359 Backup set #%d: %s\nPreviously cataloged with file detail information.
3360 Blank Tape
3361 Foreign Tape
3362 Bad Tape
3363 File %s was skipped.
3364 File %s was skipped by the user.
3365 Backup set #%d: %s\nImage Backup.
3366 No tape in the drive.
3367 The tape drive is busy.
3368 Unrecognizable Tape
3369 %s bytes %s %s\n
3370 Backed up %ld file in %ld directories.
3371 Aborting ... Completing backup of file.
3372 %s
3373 Processed %s bytes in
3374 %d hour,
3375 %d hours,
3376 %d minute, and
3377 %d minutes, and
3378 %d minute and
3379 %d minutes and
3380 %d second.
3381 %d seconds.
3382 Backup of "%s"\nBackup set #%d on tape #%d\nBackup description: "%s"
3383 Aborting ... Completing restore of file.
3384 Current File:
3386 Current file: %s\n\nClick Continue to finish writing this file to tape, or click Abort to stop the backup without finishing the current file.
3387 Current File: %s\n\nChoose Continue to finish writing this file to disk, or click Abort to stop restoring without finishing the current file.
3388 Restored %ld file in %ld directories.
3389 You have chosen to format this tape. All of the information on the tape will be destroyed.
3390 Format Tape
3391 Format started on %s at %s.\nFormatting...
3392 Format completed on %s at %s.
3393 Abort Operation
3395 Tape drive error was detected.
3396 \nOperation Completed.
3397 The tape is full. The tape has been rewound. Insert the next tape for this backup.
3398 The end of the tape was reached and the tape has been rewound. Insert the next tape for this backup.
3399 Tape has been rewound. Insert tape number %d in drive %s.
3400 Active files that were restored will not become usable until the computer is restarted.
3401 This tape is of the same tape family. Insert a different tape in the drive.
3402 Tape in drive %s is not blank. It was created by another application. Do you want to replace the data on this tape?
3410 Software ECC Tape
3411 Newer Version Tape
3414 Network disk drive has stopped responding. Backup set aborted.
3417 Out of Sequence Tape
3418 Sytos ECC translation error. Please check the manual for possible solutions.
3419 SQL Tape
3435 Unable to restore data to %s,\ncheck the application event log for more information.
3500 Insufficient memory available.
3507 Error writing the script file %s.
3508 The tape operation was terminated by the user.
3509 Improperly linked tape drive channel.
3511 Tape in drive %s is write-protected.
3512 Unknown tape format message: %d.
3513 Unknown MSG handler message: %d.
3514 Unknown loops error: %d.
3515 Error opening the log file %s.
3517 Unknown log message: 0x%x.
3518 Error accessing the password database.
3519 Syntax error in command line.
3520 Syntax error on line %d of the script %s.
3521 Cannot open the script file %s.
3522 Too many nested script files.
3523 Target drive must match the source drive. Source: %s, target: %s.
3524 File may not be renamed. Source: %s Target: %s.
3525 Invalid source path or file name specified in %s.
3526 Invalid target path or file name specified in %s.
3527 Command line %s contains an invalid parameter.
3528 Error writing to the password database.
3529 Error reading the password database.
3530 The password database is full. Increase the value of "Max_PDBase_Entries" in the MAYNARD.INI file.
3531 You do not have privileges to restore to the volume %s.
3533 Unknown password database error: 0x%x.
3535 The supplied password does not match. Please try again.
3536 Error 0x%x during attachment to device %s.
3538 Tape positioning error on %s.
3540 Encryption Unit error: 0x%x.
3541 No files were selected for Backup.
3542 No files were selected for Verify.
3551 The tape operation was terminated.
3556 There are no more connections available for this device.
3564 The password does not match.
3566 Unknown loops prompt type: 0x%x.
3567 %s does not contain a tape.
3574 No files were selected for Restore.
3577 Connection to device %s has been lost.
3580 Nothing selected for Transfer.
3581 Unexpected end of backup set encountered on %s.
3582 Tape in %s is unrecognizable and cannot be read.
3583 Unable to read the tape in %s.
3584 Unable to write to the tape in %s.
3585 An inconsistency was encountered on the tape in %s.
3586 An error occurred during translation of data to or from the tape in %s.
3587 Error on the tape in %s.
3588 Error on %s.
3591 Unable to obtain the address of the server %s on the network.
3592 Unable to attach to server %s.
3593 Unable to login to server %s. Enter another user name and password.
3594 Error opening resource file: %s%s.
3595 Inconsistent tape hardware parameters were defined.
3596 Unknown device driver initialization error.
3597 The MaynStream software is already in use on this system. Concurrent use of MaynStream is not supported.
3602 An inconsistency was encountered on the tape in %s. Do not append to this tape.
3603 Unable to bring the Microsoft Exchange service \'%s\' back on line. Check the event log for more details.
3604 Unable to set the NT compression state for %s.
3800 CDS_GetRemoteDriveBackup %d
3801 CDS_GetNRLDosVector returned %02X.
3802 SMB_Initialize returned %d (%04X)
3803 InitializeRemote : Buffs %d Unused %d
3804 rinitfs: Could not locate NRL function table.
3805 RewindDrive( ): hdl = %d
3806 Drv Error = %d
3807 ret_val = %d
3808 EraseDrive -- Exabyte: %d Security: %d
3809 Calling TpErase() ...
3810 Calling TpWriteEndSet() ...
3811 ReadNextSet( ):
3812 TpReadEndSet( ):
3813 EOS Detected
3814 EOM Detected
3815 TpRead( ):
3816 Error = %d Req = %ld Got = %ld
3817 ReadNextSet( ): ret_val = %d
3818 GotoBckUpSet( )
3819 OpenDrive( ): Card = %d No = %d
3820 CloseDrive( ):
3821 -- Rewind
3822 -- No Rewind
3823 Baddr: %x Irq: %d Dma: %d No Drives: %d
3824 UpdateDriveStatus( ):
3825 Val = %lx Changed
3826 Val = %lx Unchanged
3827 Cataloging Elapsed Time : %d minute(s) and %d second(s)
3828 UI_TPOS: %s, tape #%d, set #%d
3829 Difference at head %u cyl %u sector %u\nTape Contents:
3883 No longer able to read disk at head %u cylinder %u sector %u.
3884 Not verifying bad sector at head %u cyl %u sector %u.
3885 Unable to read disk at head %u cyl %u sector %u.
3886 Unable to write to disk at head %u cyl %u sector %u.
3887 Closing Bindery
3888 AL = %x
3889 Opening Bindery
3890 Card %d Parameter Block:
3891 %8lx %8lx %8lx %8lx %8lx
3892 DriverAddr = %lx lw_channels = %lx
3893 Attach to %s
3894 Detach from %s
3895 NOVELL(%d) server %s, volume %s, supp = 0x%02x
3896 Base = "%s"
3897 Card %x number of attached drives %x
3898 Card %x init error status = %x
4000 Verify
4001 Insert Tape
4002 Replace Information
4003 Append Information
4004 File In-Use
4005 Continue
4006 Copy Tape
4007 Erase
4008 Corrupted File
4009 Restore
4010 Macintosh Names
4011 Bindery Files
4012 Security Information
4013 Backup Error
4014 Next Set on Tape
4015 Retension
4016 Keep Current Settings
4017 Warning
4018 Tape Password
4019 Method Is Invalid
4020 Abort
4021 Backup
4200 MM/dd/yyyy
4201 :
4202 am
4203 pm
4204 ,
4220 Read Only Drive Encountered!
4225 Drive %s will not have the attribute bits reset during backup.
4400 Loading set list from tape.
4401 Loading set directory from tape.
4402 The tape
4403 the tape drive
5000 MS_SCSI
5001 Maynard PC 8-Bit SCSI Controller
5002 Maynard PC 16-Bit SCSI Controller
5003 Maynard PS/2 SCSI Controller
5004 MS_QIC
5005 Maynard PC QIC-02 Controller
5006 Maynard PS/2 QIC-02 Controller
5007 AD_SCSI
5008 ASPI PC SCSI Controller
5009 ASPI PS/2 SCSI Controller
5010 MS_DUMMY
5011 Maynard Dummy Controller
5012 IBM_SCSI
5013 IBM PS/2 SCSI Controller
5031 &Attached drives
5032 &I/O Address
5033 Interrupt &Number
5034 D&MA Channel
5035 Auto Determine
5036 None (non-DMA)
5040 360
5041 370
5042 FF60
5043 FF70
5050 0
5051 1
5052 2
5053 3
5054 4
5055 5
5056 6
5057 7
5058 8
5059 9
5060 10
5061 11
5062 12
5063 13
5064 14
5065 15
5100 Tape Hardware Initialization Results
5101 The hardware has not been initialized for this configuration.
5102 The hardware is ACTIVE and initialized for this configuration.
5103 The hardware FAILED to initialize for this configuration.
5104 The hardware is initializing.
5105 Select a controller card.
5110 The hardware has been tested successfully.
5111 Warning: this change requires a jumper change to the controller card.
5112 A SCSI tape device has been detected, but the tape driver has either not been installed, or failed to start. Make sure that the appropriate driver has been installed using the Tape Devices option in Control Panel.
5113 Interrupt conflict. Change the controller interrupt number.
5114 DMA conflict. Change the controller card DMA setting.
5115 No card has been detected. Install a card in the machine.
5116 Invalid Base Address. Select a different address.
5117 Invalid Interrupt Number. Select a different number.
5118 Invalid DMA Channel. Select a different channel.
5119 The number of attached drives found (%u) does not match the configured value (%u).
5120 No Target ID has been selected. At least one Target ID must be selected.
5121 The Controller Card is Disabled. Enable it to perform the test.
5122 The device driver failed to load. This may be due to an incomplete installation. Reinstall or contact Technical Support.
5125 A controller card has not been selected. Do you wish to select one now?
5150 Tape Drive Error Detected
5151 No tape drive detected. If a tape drive is attached, make sure that the cables are properly connected and that the power is on. Also make sure that the appropriate tape driver has been installed using the Tape Devices option in Control Panel.
5152 A tape device has been detected, and the tape driver started. However, the tape device is not responding. Check that tape device power is on and cables are properly connected.
5162 Poll Drive FAILED: SEVERE ERROR -- Shutting Off Poll Drive
5163 Tape Eject had a BIG PROBLEM: %d
5164 The tape drive is not responding. Please check to make sure the tape drive is on, the cables are connected and the tape driver is installed. Then restart the %s program.
